Features

• Double-Tube Handle

  Tube-within-a-tube design provides strength while reducing weight.

• Internal Threads

  Threads are protected from damage if torch is dropped.

• Adjustable Valve Resistance

  PTFE packing provides a gas-tight seal while allowing the "drag" to be adjusted to the individual preference.

• Flo-Trol™ Valve

  Eliminates seat burn out due to reverse flow of mixed gases.

• Slip-in Cutting Tips

  Save time when changing tips - no wrench needed. All tips are hand tighten to reduce thread wear and operator fatigue.

• Triple O-Ring Seal

  For easy 360-degree torch head rotation to reduce operator fatigue.

• Center Pre-Heat Valve

  Usage for both left and right-handed operators.

• Dual Filters Including Sure Seat™

  Protects high-pressure regulator seat from debris for reliable operation and long service life.

• External Relief Valve

  Protects regulator from damage due to inadvertent high-pressure surge. Relief valve will release excessive pressure and automatically reset.

• Neoprene Composite Diaphragm

  Resists corrosion for extended service life.

• Graf-Tite® Soft Seat Tip

  Protects the tip seat from nicking for longer use.

• Three Tube Construction

  Keeps gases separate in the cutting attachment until mixed at the tip for safety. Mixed gas stays farthest away from the operator.

• Slip-In Design

  Tips are slip-in and hand-tightened saving time and minimizing operator fatigue when changing tips. Quick and easy tip changes encouage use of the right tip to efficiiently complete the job.

• Medium Duty Cutting Attachment

  Cuts up to 6-inch thick steel

• MC12 Series Medium Duty Cutting Tips

  Slip-in cutting tips for general medium-duty hand cutting. Use with medium pressure acetylene and oxygen. MC12 can cut from 1/4 in.(6mm) to 5/8 in.(16mm) thick metal.

• MW205 Medium Duty Welding Tip

  The MW200 series is for general purpose or medium-duty welding and brazing with acetylene gas. Swaged construction provides greater heat concentration for improved “puddle” control. Slip-in and hand tighten for 360° rotation eliminating hose resistance during operation. MW205 can weld up to 1/8 in. (3mm) thick metal.

• MC40 Series (Two Piece) Medium Duty Cutting Tips

  Two-Piece medium preheat cutting tips for hand cutting with propane and propane-based fuel gases. MC40-1 can cut from ½ in.(13mm) to 5/8 in.(16mm) metal thickness.

• Silver-Brazed Connections

  For extra protection, strength and leak resistance.

• Nickel-Plated Finish

  Deflects heat and resists corrosion.

• Riveted Knobs

  Will not come loose from the valve stem.

• Silver-Brazed Nickel-Plated Torch Joints

  Provides strength, leak resistance and heat deflection.

• Stainless Steel Ball-Style Valves

  Allows for smooth adjustment and positive seating to eliminate leaks.

• Slip-in Tip Design

  No wrench is needed allowing for quick and easy tip changes.

• Nickel-Plated Bonnet with Forged Brass Body

  Protects against corrosion.

• 2-Inch Regulator Gauges

  The large regulator gauges are easy to read and are constructed from shatter-resistant polycarbonate lenses.